Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a existing full PRI and just added a second PRI with no d channelon a 2620 IOS 12.3(12) switch-type primary-ni.I have configured a nfas group with the existing PRI as the primary and the new PRI and none. When I reach 23 channels in use I get ...
Hi all,I was wondering if anyone has got the following error "basic: Exception: java.security.AccessControlException: access denied (java.util.PropertyPermission java.version read)" accessing the PDM from a machine running Java JRE5.0? If so where yo...
HI All,I'm new to security and am finding several deined on inside interface access-list for ICMP (type 0 , code 0) from inside host > outside host. This is happening 24hr a day. The only thing I can see in logis we are experencing ping sweeps from t...
Is it possable to connect to another pix using aes-256 from behind anotherpix. I have used the fixup protocol esp-ike and this works for des or 3des butI am not able to connect when I change to aes-256 on the remote pix.
I agree the acces-list is less secure, but this wouldbe the only way to receive these notifcations message.http://support.microsoft.com/default.aspx?scid=kb;en-us;264035&Product=ech
You can create a access-list to make your router a packet sniffer to get the IP. This can be done by creating access-list 120 below and appling to your ISP side interface. Once you have the IPyou can then trace through Arin.net to the ISP andattack i...
I am assuming you are using Exchange 2000 or higher. If you have not installed patch 6332.0 you should install as this issue is listed in the fixes. But if you have try using a access-list x to inside and access xx listed below to your interfaces. Th...
mcvosi,Do you have any access-list configured in your pix blocking outbound traffic from your LAN? If so add a line before the deny statement of the access-list "access-list xxx permit tcp host (workstation IP)host (2600 IP) eq 22.
