Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
if i have 2 OSPF WAN routers which are not connected physically and the back side LAN is running static routing and HSRP is created how can i create the redundancy between the 2 routers, without changing the LAN side configuration?
HiI have a 2921 router with wrong image and it accessed on ROMMON mode and when i enter tftpdnld and i enter the ipaddress, subnet mask, gateway and file name and it keeps on giving me the interface Gig0/0 is showing down do we need on that case a cr...
Hello AllWe have a customer has the following scenario:-1- On DC#1 has certain application and installed on VM#12- On DC#2 has the same application and installed on VM#23- He needs when the VM#1 goes down (Not the server hosting this VM), the users m...
Dear ExpertsI have an ASR1006 with SIP-10G and embedded service processor 40G and I will install 4 modules over the SIP 10G two modules SPA-5x1GE-V2two modules SPA-1X10GE-L-V2do we require additional SIP-10GThanks and Regards,
hi Vignesh thanks alot for your support regarding the 2nd question we require the different VDC's to communicate togetherand if the link between the VDC's is 1G is there is any issue in it since that most of the links are 10G and the link
hi Vignesh thanks alot for your support regarding the 2nd question we require the different VDC's to communicate togetherand if the link between the VDC's is 1G is there is any issue in it since that most of the links are 10G and the link
