Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are having one of the line card WS-X4748-12X48U+E in Cisco WS-C4507R+E. Network connectivity of desktops specially "Lenovo M73" connecting on multi gig port from 1 to 12 are not coming up..while the same desktop is working on other gig port from 1...
Dear All,i have one router with 2 ISP connected on that. from both ISP, router is receiving default route.There is one firewall between LAN and internet router and default route pointing towards ISP1.topology is attached for your reference.Below are ...
Dear All,
i wanted to know the way to find the IP and MAC connected on the particular interface of the FEX.
I tried below commands but not getting any output for that particular interface.
#sh mac address-table | i Ethernet100/1/2
#sh ip arp detail ...
Dear All,
I am setting the IP SLA ICMP jitter operation on 3845 router with the following configuration,
ip sla 1 icmp-jitter 10.1.17.41 source-ip 10.1.255.29 num-packets 100 frequency 30
ip sla schedule 1 life forever start-time now
ip sla reaction-...
I am novice to the FWSM teachnology.We have FWSM which has the multiple context configured for the different business at one site.On ther site we have FWSM which is configured with multiple SVIs for the different business.What is the difference betwe...
Thanks Reza for prompt response.
I have only one default route from ISP1 in my routing table. How can i install default route from ISP2 as well?
iNTERNET#sh ip bgpBGP table version is 5, local router ID is 115.12.12.1Status codes: s suppressed, d dam...
You are absolutely correct.we need to remove network statement corresponding to EIGRP routes from BGP in order to stop advertisement.In addition of that if we are using redistribution then we can filter what routes needs to redistributed from EIGRP ...
in order to advertise EIGRP networks into BGP, you need to redistirbute EIGRP networks under BGP process.In case you are already advertising there are two ways,1.use distribute list under EIGRP process in order to permit or block some networks.2.Use ...
