We have the following setup on our Cisco ASA version 8.6.1 One to one NAT rule from outside to our Exchange 2010 cluster IP address (DAG group). This is working fine for clientson the internet accessing their emails via Exchange using their phones. ...
CISCO ASACurrently using Cisco ASA with Cisco VPN clients and everything is working apart from Vodaphone 3G users on Ipad/Iphones. These workon normal wireless but not 3G. I have added the NAT -T on the ASA but still have the same issue. Any other id...
We are seeing the cpu on 2 of our C500 switches running at 99% with the following process causing the issue, have anyone seen this before:84 165202 50170 3292 0.00% 0.05% 0.05% 0 HQM Stack Proces 85 167864326 14974841 11...
We have the following setup in our DataCentre and experience IP conflicts with the HSRP address. On the 2960 is 1 VLAN connected to a Catylyst 4000 switches with HSRP enable for the gateway of clients on the 2960. The probem we experience is customer...
We experience high CPU on Cisco 500 switches with average 60 % CPU and found this process running "HULC prs macro p". Does anyone know what this is ?CE500-LANBASE-M), Version 12.2(25)FY, RELEASE SOFTWARE (fc3
HiIt 's the Cisco 5515 model in HA -Active -Standby. Only have 2 vlans and all the hosts have the VRRP address as the gateway set and a default route to the firewall from the Juniper switches.
Thanks for the info but is there any other settings on the ASA that could resolve this as the networkteam is concern about impact on the resources of the ASA to clear the mac table every 60 seconds?
HiThis is now resolved, this was due to NAT-T , I was checking ASDM and it was showing it was enable but when I checked the running config from SSH it was'nt, enable NAT-T and it is now working.
HiSorry for the incomplete diagram, I have removed most of the config and IP address information. Your diagram is correct in the setup we currently have setup, the solution and setup work fine but the main problem are customers change their IP inform...
I have attached the digram with basic connections and setup.==========================================================================================Cisco 2960==========hostname xxxxxxxxxxxxxxxxxxxxxxxx!logging buffered 200000 debugging!username xxx...
