Also helpful would be the knowledge that the switch has an established trunk on the ethernet connection where the router is attached.... not just placed in VLAN 71. There is a command useful for performance here as well:ip route-cache same-interfaceT...
If the switch ports are at AUTO negotiate and the PC are set to static FULL/100 there will be CRC due to the switch not receiving the AUTO signal from the PC and defaulting to the standard of 100/HALF. This could be very problematic in a large singl...
I had similar issues. Of course I agree with the previous concensus, that the TCP WINDOW size in the router only needs to be adjusted for TCP connections that are made to the router (rsh, rlogin, rcp, telnet, tacacs, dlsw, etc).I increased TCP Windo...