Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have a curious issue with a customer where I have been asked to come in to assess their wireless environment. There are a few immediate issues where they will not give me access to the WLC read only or PI but they have informed me that on...
Hi Community folk,I need some advice on how to set up a dual (resilient) wireless bridge link.<!--break-->I have each pair of bridges configured trunking vlan 82 native and user vlan 570. Individually they are fine and I get management access on vlan...
Trying to find out which one does what with regards to MSE and Prime, can the raw data be used from either or are their specific things that one does that the other doesn't?
Hi Community folk,I have a project manager who has come to me after selling a 3600 + 802.11ac upgrade module to a customer to use as a wirelesss bridge, they have actually got it connected but only at 54M, I've done some digging into this and can't...
Hi All,Can the LDAP be configured on the Digital Media Manager to point to at least two Domain controllers? Ive not configured DMM before and cannot prestage it so I need to be competent when I am on the customer site. Not the best situation to be i...
Opening the debate again as I see this is 11 months old but I can't see that it has been answered? I'm currently engaged with replacing 14 x 5508's with 5520's and was wondering if indeed the licenses are transferable from the 5508's?
Thanks
Rockfo...
Hi Steve,Thanks for the prompt reply, this is the correct answer but I was aware of the WPA2/AES requirement to enable the higher rates that 802.11n supports. The question was really around whether the 3602 + 802.11ac module was capable of bridging a...
This response must be out of date now due to 802.11n does anybody have any idea how many clients cisco recommends per access point now? All I can find is a pdf on collaborative high density testing with intel and they use 10 clints with an average th...
