About xBan

xBan · 08-18-2023

Hi , Im very newbie in networking. i have question about OSPF routing with Static. i have this configuration below, why i cant ping R5 and R1 network from R4, even though i can see their network in my ip route, i can ping it also from R3. is there a ...

xBan · 08-22-2023

Thank you. yeah it resolve the problem. But what if the R1 is like a firewall. how do R1 knows the router behind R5 if we remove the default route to R5?, lets say R5 is a ISP

xBan · 08-22-2023

Hi, Do you have a answer why it behaves like that?

xBan · 08-21-2023

R2 route10.0.0.0/8 is variably subnetted, 2 subnets, 2 masksC 10.10.10.0/24 is directly connected, FastEthernet1/0L 10.10.10.2/32 is directly connected, FastEthernet1/020.0.0.0/8 is variably subnetted, 2 subnets, 2 masksC 20.20.20.0/24 is directly co...

xBan · 08-21-2023

sorry did mistake heres the traceroute from R4 to R5 R4#traceroute 192.168.1.5Type escape sequence to abort.Tracing the route to 192.168.1.5VRF info: (vrf in name/id, vrf out name/id)1 30.30.30.3 4 msec 24 msec 8 msec2 10.10.10.2 20 msec 28 msec 24 m...

xBan · 08-21-2023

Yes, i already put duplex in full.. heres what i get from R4 ping and traceroute R4#ping 192.168.1.5Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.1.5, timeout is 2 seconds:!..!.Success rate is 40 percent (2/5), round-trip mi...

Member Since	‎08-17-2023 11:31 PM
Date Last Visited	‎09-27-2023 12:02 AM
Posts	11
Total Helpful Votes Received	1

User Statistics

User Activity

Need Help in Static OSPF Redistribute

Re: Need Help in Static OSPF Redistribute

Re: Need Help in Static OSPF Redistribute

Re: Need Help in Static OSPF Redistribute

Re: Need Help in Static OSPF Redistribute

Re: Need Help in Static OSPF Redistribute