About georgios77

georgios77 · 07-04-2024

I have the following configuration on a Cisco 9300 : interface TenGigabitEthernet1/1/1switchport access vlan XXswitchport mode access!interface TenGigabitEthernet1/1/2switchport access vlan XXswitchport mode access!I have two PCs connected to those i...

georgios77 · 07-05-2024

Thanks for your response. No, it isn't about stick mac. What I have tried to succeed is to make the switch forwarding traffic from Te1/1/1 when the line between Te1/1/1 and PC1 became unidirectional (the line transmits data from Te1/1/1 to PC1 but n...

georgios77 · 07-04-2024

This is the output:show controllers ethernet-controller tenGigabitEthernet 1/1/1 Transmit TenGigabitEthernet1/1/1 Receive 12751238 Total bytes 12715060 Total bytes 31094 Unicast ...

georgios77 · 07-04-2024

Thanks for your response.I have double-checked; it is the same VLAN. I have also checked the fed MATM by using the following command: show platform software fed switch active matm macTable vlan XX and the entry exists in the macTable (in the same v...

Member Since	‎09-05-2023 12:01 AM
Date Last Visited	‎07-23-2024 01:04 AM
Posts	4

User Statistics

User Activity

Cisco 9300 IOS XE 17.5.1 - Frames do not switched in static mac

Re: Cisco 9300 IOS XE 17.5.1 - Frames do not switched in static mac

Re: Cisco 9300 IOS XE 17.5.1 - Frames do not switched in static mac

Re: Cisco 9300 IOS XE 17.5.1 - Frames do not switched in static mac