Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all!
I'm trying to stack 920024P *1 & 920024T *2
a error message said:
stack cable authentication failed for cable inserted on stack port 1 on switch 1
reloading chassis because cable with auth failed on stack_port_1
chassis 1 reloading reason - s...
Dear all!
I'm stuck in the rommon mode on my 9500, so I performed factory reset earlier this day, after reset it seems like it removed all the files including the start-up pkg & conf, I tried to dir flash and bootflash, both has nothing in it, anyone...
Dear all I'm having a trouble while I was configuring my switch
So I wanted to add up this line to my switch
statistics packet protocol
but it kept pointing out that the statistics command had an error like below
(config-flow-monitor)#statistics pac...
Hi everyone! I had a problem while I was trying to downgrade my c9200 from 17.09.04 to 17.06.05, it displayed a weeor message:
install_add: Adding IMG[1] Switch 1 FAILED: /mnt/sd3/user requires 514791 KB of free space, but only 266332 KB is available...
Hi all, I'm setting up a brand new switch 9200's running-config, I did not setup vrf settings, but when I showed running-config it displayed "vrf definition Mgmt-vrf", does it enable by default?
And also address-family as well, I did not setup these ...
I tried three different vendors of USB, and the current one is the only one that's able to boot from it, but it only allows me to boot with 17.03.XX's bin file, but the old version bin file got erased when I was trying to factory reset the second swi...
yes it is, I now can execute the command then I got this error message:
Integrity Check Failed:boot: failed to boot file usbflash0:cat9k_iosxe.17.06.05.SPA.binERROR: failed to boot from usbflash0:cat9k_iosxe.17.06.05.SPA.bin (Aborted)
I'm pretty sure...
Hi Leo thanks for the reply, it displays the error message below:
rommon 15 > boot usbflash0:cat9k_iosxe.17.06.05.SPA.binboot: attempting to boot from [usbflash0:cat9k_iosxe.17.06.05.SPA.bin]%ERROR: File system protocol not found on device (Unsupport...
