About Elbadri

Elbadri · 09-07-2023

Hello gentlemen,I'm facing a rare issue, I have 8 CICSO switches (IE-3000) connected together and each switch has one device connected to it(all these devices are in one vlan). I added a new switch in the loop and was able to ping all devices from it...

Elbadri · 09-10-2023

I checked the configuration of the switches and found nothing is unique for each switch except for IP address and host name, the issue took place only after adding the new switch in the ring, the Fa1/2 is showing connected and communicating normally ...

Elbadri · 09-10-2023

show spanning-treeVLAN0100Spanning tree enabled protocol ieeeRoot ID Priority 32868Address 0087.6413.5600This bridge is the rootHello Time 2 sec Max Age 20 sec Forward Delay 15 secBridge ID Priority 32868 (priority 32768 sys-id-ext 100)Address 0087.6...

Elbadri · 09-10-2023

I can't ping my when connected by console.I compared the configuration between all switches , there is nothing unique and different in thier configuration execpt for IP address and host name.This issue took place only after adding the new switch in t...

Elbadri · 09-08-2023

vlan 1 has no port configured,vlan 2 has all 1-4 ports, port#1 is connected to a device, others are spares and I used them to access the devices on others switches

Elbadri · 09-08-2023

Thanks, I will check that.I have just copied the configuration from one switch and installed it in the new switch, I only changed host name and management IP address, I will check other switches if there is something unique in each switch than need t...

Member Since	‎09-07-2023 08:49 AM
Date Last Visited	‎09-27-2023 12:39 AM
Posts	8

User Statistics

User Activity

I can't ping devices until restarting the switch

Re: I can't ping devices until restarting the switch

Re: I can't ping devices until restarting the switch

Re: I can't ping devices until restarting the switch

Re: I can't ping devices until restarting the switch

Re: I can't ping devices until restarting the switch