We just installed some IP-Phones and we are hearing some calls cutting in and out. Talked to the provider and they said that enabling QOS could possibly help. Could I get some guidance with this, I have tried to look into Auto-QOS and tried to set it...
So we have a DHCP and DNS server with the IP of 10.1.0.2. Is there a way to create and ACL that will allow the client to talk with the DHCP and DNS server and allow HTTPS traffic for browsing, but will not allow anything else? Here is what I have tri...
Hello, so I have a few questions. Let me start off by saying what I have setup already. We recently bought some digital signage boxes for the TVs at different locations. We also bought some Ocean Matrix HDMI over IP extenders to run the HDMI connect...
I saw a video today, would this work? Since I know where the issue is, could I set an ACL with the subnet of the phones, use the ACL to Match-Any in a class-map, and then set a policy map to retain a certain bandwidth of the link. I sure appreciate y...
I gotcha, where do I start with manually setting up QOS for VOIP traffic? I have read a little bit where I guess I would need to "classify" the traffic first, but what is the best way?
The company that manages our WAN has taken a look, they mentioned that the Uplink to our ISP, 2 bonded 1-gig links, at the Central Office is peaking 99% utilization multiple times a day. This is most likely the issue?
We have another company manage our WAN and the WAN switches. All traffic from the locations flows towards the central office. Sorry if this is sub par drawing.
