About zissisktm

zissisktm · 05-24-2024

Hi Community,ISR C1101-4P connected to lan interface of ZTE H268Q (VDSL50) the problem is that some websites can't load quickly,shows connection time out and some other's load correcty.I have made adjustments with IP TCP ADJUST-MSS 1452 and IP MTU 1...

zissisktm · 05-24-2024

Thank you for your answer,I have tried also the operation, bridge mode the isp router and the C1104-4P made the PPPoE operation with necessary other configs and a had the same problem but when i set the mtu to 1492 on dialer interface and adjust mss ...

zissisktm · 10-02-2023

Hi,Finally it's working!I made the changes and also i add theip route 0.0.0.0 0.0.0.0 192.168.2.1 access-list 1 permit 192.168.2.0 0.0.0.255 Thank you for your help!!

zissisktm · 10-01-2023

Hi, i am new to networking and i m little bit confuse. This router its like soho routers with 4 Lan interfaces L2 and 1 wan interface L3. The topology is from the Lan ISP modem/router to cisco c1101-4p wan port. No connectinity from cisco LAN ports....

zissisktm · 09-28-2023

Hi,I have the same router and i have no connectivity from all lan ports g0/1/0,g0/1/1,g0/1/2,g0/1/3.The interface g0/0/0 its ok and can make successful pings outside.What do you think that is the problem?Thanks in advance

Member Since	‎09-28-2023 09:26 AM
Date Last Visited	‎07-05-2024 02:57 AM
Posts	5

User Statistics

User Activity

Ethernet MTU and TCP MSS Adjustment in the C1101-4P

Re: Ethernet MTU and TCP MSS Adjustment in the C1101-4P

Re: Router ISR 1101-4P configuration. IP address DHCP from ISP. Not ro

Re: Router ISR 1101-4P configuration. IP address DHCP from ISP. Not ro

Re: Router ISR 1101-4P configuration. IP address DHCP from ISP. Not ro