About tm2008

tm2008 · 03-31-2022

I migrated configuration from ISR1921 to ISR4221, but find ip load-sharing per-packet command(used in ISR1921) is disable in ISR4221(CEF is enable), only ip load-sharing per-destination is enable by default.know load-sharing per-packet command is not...

tm2008 · 01-07-2009

Would you help me to understand the reason why Total Output Drops increasing on WAN interface fa0/0( facing to VPLS/L2 service link) on my 1841 router?To my understanding there are two reasons that could cause this output drop counter increasing as f...

tm2008 · 03-31-2022

thank you for quick reply and helpful information.i have looked the information in links, one question about nodes: "Although per-packet load balancing is intended for use on the majority of Cisco IOS routers, it is not supported on the Cisco ASR 100...

tm2008 · 01-08-2009

Thanks a lot, understand that congestion management queueing policy need to be implemented to avoid the output drop, and setting up the lab to see what actually happens when there are more traffic than 10M generated from LAN to WAN. will post when t...

tm2008 · 01-08-2009

Thanks a lot for your suggestion, we are currently setting up a lab to replicate the condition. will post when result comes up.

Member Since	‎01-07-2009 01:35 AM
Date Last Visited	‎11-11-2025 12:46 AM
Posts	6

User Statistics

User Activity

ISR4K is not supporting command ip load-sharing per-packet, why?

Total Output Drops increasing on WAN facing FE port

Re: ISR4K is not supporting command ip load-sharing per-packet, why?

Re: Total Output Drops increasing on WAN facing FE port

Re: Total Output Drops increasing on WAN facing FE port