Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe are performing throughput testing using the IPerf tool with 1 client on 2.4 GHz, 2 clients on 5 GHz, and 1 client on 6 GHz. All clients successfully associate and obtain IP addresses.During simultaneous testing from a single Test PC, throughput ...
Hi,I am testing CW9166I-ROW Cisco APs running IOS‑XE 17.15.04d on a C9800CL-vWLC. When the country code is set to 'IN'(India), the 6 GHz radio remains down. If I change the country code to AR (Argentina), the 6 GHz radio comes 'UP', but the 6 GHz SSI...
HiWe are using a CW9166 Access Point managed by a C9800-CL Wireless LAN Controller (vWLC) running image C9800-CL-universalk9.17.15.*Through the vWLC GUI, underConfiguration > Radio Configuration > High Throughput,we reduced the number of spatial stre...
Hi,We have connected a C9800-CL Wireless LAN Controller to a CW9166 Access Point using the image C9800-CL-universalk9.17.15.01.iso.What is the command to check the power or current consumption of the CW9166 Access Point via the C9800-CL WLC CLI or GU...
Hi,Regarding the setup of Cisco Spaces Connect for IoT Services with our C9800CL Wireless Controller, we are experiencing an issue with the Data Receiver Application. After re-registering the Data Receiver Application and subscribing to the appropria...
Hi,1. Regarding Country Code, Our test setup is located in India. The C9800 vWLC and CW9166I-ROW AP are configured for the AR regulatory domain and the Intel AX210 clients automatically operate under the IN regulatory domain due to their location. We...
Hi,Yes 6GHz client (AX210) passes the traffic when it is only the client connected and also when it is connected in a different machine(2Ghz/5Ghz in one TestPC and 6Ghz in other TestPC) it works simultaneously as well.
Hi,Thanks for the suggestions.Unfortunately, I am unable to collect the requested command outputs at the moment. We have recently moved the test setup from our basement test area to a lab environment. In the lab, the presence of India regulatory beac...
Can you please confirm whether the IOS‑XE image 17.15.4 and 17.18.2 version released in December last year includes support for 6 GHz operation in the India (IN) regulatory domain? and alsoIs there any upcoming IOS‑XE image planned that will add 6 GH...
