Tom,Last night we tftp the config file to a pc, wipeed the config on the switch, reloaded it, tftp the config file back onto the switch and everything is fine. Not sure what happened when we started this, but that did the trick.Thanks for all the hel...

Tom,We had the VLAN interfaces configured before we changed the SDM template and did the "ip routing" command. Do you think it makes sense to remove the VLAN interfaces, reload the switch and re-configure the VLAN interfaces?Thanks,Mike

Tom,We cahnged the sdm template and in the output above it shows that the template is lanbase-routing, but no routed interfaces. I am totally lost on this.Thanks,Mike

Tom,We did not get to try your suggestion yesterday. In testeing we could not ping between VLAN interfaces on the 2960. We addesd VLAN 10 to an interface and connected a PC to it. We could ping the gateway, but not a PC on VLAN 100. While researching...

WIll try the suggested confifuration changes tonight. One questions, why would I need to include the VLANs in the allowed statements? The reason I ask is that with the 4500 and 3750 we use we don't have them specifically and things work fine.Thanks,M...