Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiPlease help, i have just installed a Cisco SG300 switch onto my network however as you know the switch does not use Cisco IOS.All ports are vlan however I have one port that keeps coming up with this error.10-Oct-2013 15:20:36 %LINK-I-Up: gi4, agg...
HelloPlease advise. We have just implemented CCME into one of our remote sites. Is it possible to access voicemail from home by dialing in ? and if so how do I set this up.Kind Regardsscott
HelloPlease help, just recently we configured and installed Call Manager etc at one of our remote offices.We are using call manager express, and call manger 8.5 at the HQ.One of my users has just reported that all internal calls route okay, however w...
HelloPlease helpI am having some trouble trying with some switches on site. In one location we have a HP 2510-48 port switch which we need to connect to a Cisco 3560 switch. The problem I have is that we have issues connecting fibre to the HP switch,...
HelloPlease help. Currently we have a Cisco 2960 switch connecting to our Dell Equlogic Ps4000x and 3 R710 Esx Hosts. However I have no switch redudancy etc using one switch. I would like to connect another switch (stack) if possible but am not sure ...
thanks Ronakthink I have found the issue, we have translation rules setup for particular phones which divert straight to the menu system. rule 5 for example: states 16 [5,8] but should be 16[5,6] and not 8thanks for you help
Robwhere getting somewhere now, quick question though when i select true it asks me to restart the call managerwill this affect all phones on the network, will they go down etcscott
