Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning all, I am having trouble with one of the ports on our switch. It is telling me that I have a host flapping between ports 2/8 and 2/18. I found the port that was causeing the issue but don't know what that error means or how to fix it com...
Good morning all,I am having trouble with one of the ports on our switch. It is telling me that I have a host flapping between ports 2/8 and 2/18. I found the port that was causeing the issue but don't know what that error means or how to fix it com...
Hello all,I have a switch that is setup with basic config and the issue that i am having is that when I connect computers to the switch and have the computer setup for dynamic, it does not see the network. But when I put a static IP on the computer i...
Hello,I am getting the following error message when I logon to the ASA through the ASDM: ASDM is unable to read the configuration from the ASA. Please check the configuratui and your connection and then try again by clicking the Refresh icon.But When...
I am getting this error message and I am not sure why. The only thing that was done on our network was changed the ip of the radius server and changed the dns record to show the new ip? Any Ideas, please help. Thanks Richie
I know that we do have one server that has teaming of the NIC on it. and it is our file / everything server. this is the one that went down yesterday and started this whole proccess, and made me start looking at all the connections..
Thanks very much peter for responding to this. But please be patient with me on this. I am new to this and I really don't have much experiance with this so can you please tell me how to check for the layer2 loop and what STP is? Sorry for bothering y...
yes I changed the AAA server group ip address to reflect the new ip. Then I apply the changed and put it to flash and do the test option and it still comes back and says the same thing. I am wondering if there is something to do with the dns or somet...
