About andrew.brennan

andrew.brennan · 12-15-2021

So I'm a Mac user on 10.15.x, but I believe my AnyConnect client is up-to-date? But I'm unable to get the VPN connection working and I've already tried tethering off my cellphone (can't say I ever trust the PaloAlto firewalls we have). Any chance my...

andrew.brennan · 09-09-2019

So unless I'm experiencing the "old code programmed the cards in the standby chassis" problem, I believe this update to be inaccurate at this time. You've listed 15.2(1)SY6 as a fixed version of IOS, I'm running that version and have opened a case w...

andrew.brennan · 04-29-2009

Ok, so we're not liking the +20% CPU spike from our SNMP-based data collection. I have a fairly ugly TCL script that puts the output of "show ip arp" and "show mac-address-table" in a file, then copies the file to a TFTP server. At this point, inst...

andrew.brennan · 12-16-2021

So it might’ve been something with my Anyconnect client? I upgraded from 4.8 to 4.10 and was able to connect to the labs.Thanks!

andrew.brennan · 04-29-2009

HA! Ok, so it's a small world. Thanks for the help!!

andrew.brennan · 04-29-2009

event manager directory user policy "disk0:/tcl"event manager applet NOSNMP event timer cron cron-entry "28,58 * * * *" action 0.9 cli command "enable" action 1.0 cli command "tclsh disk0:/tcl/nosnmpcli.tcl"!Worked on 4 6500s, recently broke on one ...

Member Since	‎02-11-2009 09:10 AM
Date Last Visited	‎12-16-2021 12:30 PM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

AnyConnect unable to connect to gateway?

CSCvc18597 - Complete packet loss for specific flows on Sup6T using mixed 40g module

"show ip arp/show mac-address-table" vs. SNMPwalk

Re: AnyConnect unable to connect to gateway?

Re: "show ip arp/show mac-address-table" vs. SNMPwalk

Re: "show ip arp/show mac-address-table" vs. SNMPwalk