About ravikumar.basavegowda

ravikumar.basavegowda · 04-29-2009

Hi I am having a WLC 4402 running on 4.1.171.0 version, I recently purchased LAP 1252 and converted it to a LWAP by loading c1250-rcvk9w8-tar.124-10b.JA3 Image. Now the Problem is that the LAP is not registering with the WLC, On my LAP console i can...

ravikumar.basavegowda · 02-24-2009

Hi, I am having a SUP1A-2GE card installed on a 6509 chassis with 2 no of 3000 Watts Power Supply, but when i power it on, The Sup comes up but the Power Management Led starts to glow in Red and the other Modules WS-X6248-RJ-45 are not powering on. I...

ravikumar.basavegowda · 10-13-2009

Span is used to see traffic on that switch along with other broadcasts and unicast, however if you want to see the traffic on the same vlan, but different swtiches, you need to use Rspan.

ravikumar.basavegowda · 10-12-2009

If you are using tftpdnld, make sure that you are connecting your system(tftp server) to the port 0 because by default the router searches for the tftp server on the lowest port.

ravikumar.basavegowda · 10-12-2009

Yes, this ios should work. One simple way to identify this is the K9 character in the ios name.The specified Ios will support ssh ver 2.0

ravikumar.basavegowda · 04-29-2009

Hi Johannes, Thanks, I went thru the Release notes for the IOS and i could find the same. Thanks for your reply.

Member Since	‎02-24-2009 09:54 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6
Total Helpful Votes Received	3

User Statistics

User Activity

LAP 1252A not working with WLC 4402.

Sup1A-2GE on 6509 with 3000 Watts Power Supply not powering on other Module

Re: Span Switch

Re: IOS upload from ROMMON

Re: determining the correct IOS for upgrading to SSH

Re: LAP 1252A not working with WLC 4402.