Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys
My AP Model is 1832i and running a mobility express software, it looks dose not support MAC address filter in express software.
I can still create local SSID on the AP and enable MAC address filter feature but it dose not works, is thi...
Hi guys
I found 2 related docs about wireless vlan assign with single SSID, but my question is what happened if ACS/Radius server down or authentication fails. In wired 802.1x situation we could define failure vlan and guest vlan, but I didn'...
Hi,allCUCM 7.0---sip trunk(Non Sec)--Avaya SES---sip trunk(TLS)---avaya ACMSIP trunk between CUCM and SES are use G.711 a-law codec,The call failured.and avaya trace tools prompt codec mismatch. on cisco ip phone check the call status at the moment,i...
The Cluster can ping hostname each other,but when I use RTMT,the publisher "Replicattion Status" is 4,subscriber is 0.CUCM version is 7.0.1.11000-3.I reference this page,and it dose not useful. http://www.cisco.com/en/US/products/sw/voicesw/ps556/pro...
Freerk, I got your point, I'm just suppose what happened if no RADIUS response to my wireless 802.1x client(AAA server down~), dose it associated the SSID with 802.1x if authentication not pass ?