Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
! Configure HTTP Service
enable
configure terminal
ip http server
end
! Configure RIP V2
enable
configure terminal
router rip
version 2
network [network address]
end
! Enable DHCP on Workstations
! (This can't be done through router config but ind...
The QoS configurations from an older IOS (15.1) on a Catalyst 6513 can generally be translated to a newer switch like the Catalyst 9410 R. However, exact commands might differ between the IOS versions and the switch models. You'll need to review the ...
The Cisco WS-C4500X-32SFP+ switch requires a minimum of 4 fans for safe operation. Running it with only 2 fans, even in a controlled environment, isn't recommended as it might affect the switch's performance and longevity.
Consolidate SSIDs where possible and consider using VLANs to segregate devices based on security needs. Prioritize security but monitor network performance regularly. Gradually upgrading devices to support WPA3-Enterprise can also reduce the need for...
It seems the issue lies in the inspection policy that restricts DNS packet sizes to a maximum of 512 bytes, causing the dropping of packets larger than that size due to the default DNS inspection configuration on your firewall.policy-map type inspect...
