Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
so as the title suggests, ive been trying many times and configuring to make the wlc work without an external dhcp server. image below is the topology of what ive been working onso i have 4 vlans for each switches, the layer 3 switch on the left serv...
My problem is as the title says. I already configured the WLC from the website. Attached below is the pkt file configuration and if you want to access the WLC site (user:Admin1,pw:Admin123)
A network design with two ISPs connected to a central router. The goal is to configure load balancing between the ISPs to efficiently distribute internet access to multiple access points across the network. Additionally, needed to set up VLANs to seg...
as shown in the pictures below, i did use flexconnect for the SSID for its vlan interfacei guess it's weird and sometimes it doesn't work.thank you for your help!!(but if you have time, can you explain to me why it didnt work when i use the vlan inte...
Made a little change about the network topology, as shown in the image below: does everything you said still applicable with this new topology, and also with the configuration?if not, what can you recommend?
