About abernhardt73

abernhardt73 · 04-23-2009

I have an IBM Remote Supervisor Adaptor (RSA) II with a Static IP Configuration of 10.17.10.2/24.This is connected to a vlan(10.17.10.1/24) configured within a cisco 2811 router. The router's public access IP address is the "outside interface" with N...

abernhardt73 · 04-02-2009

Hello Everyone:I have spent hours putting together a "stub network," using SDM, for a single server behind a 2811 router with a HWIC-4ESW switch connected to the server's management port and its public ethernet port.Each of the server's 2 ports is co...

abernhardt73 · 04-03-2009

Hello kwu2:That was it!Even though the Vlans' SVI settings were setup with SDM, as a true l3 switch, this HWIC-4ESW has its IP routing turned off by default."ip routing" must be enabled through the CLI for each interface.*reaches through computer mon...

Member Since	‎04-01-2009 06:21 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	3

User Statistics

User Activity

no IBM RSA II response behind 2811 router

2811 Stub Network Routing Error

Re: 2811 Stub Network Routing Error