Hi,I'm trying to setup up a vlan on my 1941 router. Tried different things nothing works where am i going wrong.I can ping the vlan 192.168.130.1 and the GE0/0,GE0/1 from the FE0/0/0.Building configuration...Current configuration :...
Have existing 1811 router works fine. Purchased 2911 configured same as 1811. Download speed same as the 1811 the upload on the 1811 is 60 mb.the upload on the 2911 is 2 mb. where is my problem in the config or is it a hardware problem ?Thanks but r...
The FE0/0/1 is connected to the Trendnet TEG-2248 Switch. No trunking i was trying tagging? All vlans are allowed on the trunk. I have been using CCP to change the native vlan on the FE0/0/1.Yes i have added them to the NAT, If i change na...
Yes it was nat that needed to be properly configured. i can access the internet. Thanks.Now i'm trying multiple vlans through fe0/0/1 have the port trunked, but i can only access the internet on the native vlan not the others?If i change the navtie ...
I should add my problem is i can't access the internet from the Vlan.Yes the internet Works on the GE0/1 interface with static ip in either 204 or 216. Want to add multiple vlans so i can remove routers from the configuration.Building configuration.....
