Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello;
I'm trying to run a periodically script in TCL to execute an snmp get for a specific oid.
there is an example of the snmp get
#snmp get v2c 192.168.0.10 vrf IND TEST oid 1.3.6.1.2.1.2.2.1.8.3
SNMP Response: reqid 80, errstat 0, erridx 0 ifOp...
Hello, Do you have any idea about the (max) length of the MTU supported by the C819HG-4G-G-K9 on the air intterface? the antenna 3G-ANTM-OUT-OM can operate on the frequency range 2100-2200 MHz? thank you for your help
Hello,to create a GSM profile, we need a "username", "password" and un "APN" provided by the Service Prodiver, if you have more than one router Cisco 819, should we have a "usernale" and "password" for eatch router, or the same "username" and "pass...
the antenna 3G-ANTM-OUT-OM can operate on the frequency range 2100 MHz?Yes it oprtates because on the datasheet I foundOperating frequency bands 800/850/900/1800/1900/2100 MHzhttp://www.cisco.com/c/en/us/td/docs/routers/access/wireless/hardware/notes...
Thak you Mohanak, your response affirm my idea about the fragmentation on the network mobile, because to avoid post-fragmentation, the technique says that the maximum MTU size of a mobile user ethernet stack should be that of default ethernet minus t...
I got the response from the Service provider, Only onr APN is necessary but I should have a username/pwd for each GSM profile (for each router)5 routers = 1 APN, 5 username/pwd.
