Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a second cts-phd-2.5x failure from a CE 9 codec software update (SX20). The camera boots up going through standard PTZ motion then apparently tries to connect to the codec and the camera LED flashes a sequence while making a ticking sound. The ...
First time issue creating a macro, it is for a Codec Mini CE9.12.1I tried example macros and my own shown below, when saving any these I get ERROR "Unable to save macro: Invalid command response: Wrong number of keys (35)" Any idea what is the issue?...
I have successfully configured custom layouts using the TC Console for C60/90 codecs and now SX80/Touch10 systems.The IR remote control with the C60/90 would enable a codec with custom layouts to change the remote layout during a call with a soft but...
The local and remote layouts are created under the same name, but it appears that they are menu selected separately. I would have liked to have both activated together using the layout button via IR remote. Is this correct that the only way the remot...
TC Console under the advanced option allows for creating frames with nonstandard aspect ratios. I wanted to use this to crop excess height in the camera view. The problem is the 1080HD camera settings either maintains the aspect ratio, where the imag...
I purchased a new old stock replacement camera which has older camera firmware (S01777-2.0 FINAL [ID:20013] 2013-05-15). The camera appears to work fine. When connected to SX20 with CE9.12.3 the camera did not update to the last version. Usually when...
Solved. This issue apparently was due to a beta release of CE9.12. I downgraded to CE9.10.1 and all seems fine now.Wish the halfwake timer could have a persistent setting, instead of the temporary setting.
Thanks for the extra detail, this is excellent.Good to hear of a matrix switcher that can be directly controlled from the codec. I believe I saw that Cisco has added direct support of some switchers to expand video inputs. Did you find a means to sen...
Thank you, and some additional questions.Do you matrix switch or DA the second Quad camera and P60 presenter camera to the main codec when in the room combined mode?Is the audio out of the main codec direct connection to second codec? Is the main Tou...
