Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I set up CUPS with a NFR kit for the very first time and have a few questions. LDAP is enabled so I was able to import users into CUPC. However, in the 'end user' page of CUPS, it shows 'No Audio' and 'No Video' for my CUPC although IM is enabled a...
This is pertaining to a new install. I can access the admin page locally from the server but not from anywhere else on the network. If I browse to the following page, it times out:http://10.X.X.X/Web/SAI'm not quite sure what's missing because it w...
I have a customer with Unity 5.x and it is integrated with Exchange 2003. How can you allow message storage on the Exchange server but stop the emails (with the .wav mail message) from being sent to the user's Outlook inbox?
Silly question here. I have a 3750G with routed switchport and an IP address of 10.1.1.149/16. This connects to a flat network via fiber on VLAN 1 with a 10.X.X.X subnet. From my switch, I can ping their firewall at 10.1.1.2 and exchange server at...
Hi Mike,No, I can't. Are the 'audio' and 'video' icons for CUPC on the right side of the end user page in CUPS supposed to be enabled? Right now, they are grayed out and only the 'IM' icon is enabled along with the controlled extension below it. I...
My apologies, didn't mean any offense. The TAC engineer we were working with gave us the same 4.x doc and many people on these forums mentioned that it did not work with the 6.x and above CM versions. As a matter of fact, we're still trying to make...
