Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a quick question....I currenlty have a remote site connected to head quarters via a point-to-point and would like to configure GRE over IPSec using a DSL line to serve as backup.Is there anything else I need to do for the DSL connection to ...
Hi everyone,I'm trying to figure out the best way to setup GRE over IPSEC and provide HA for GRE.I have attached a basic configuration file for the setup belowMy Setup: VENDOR ROUTER ...
I would like to know the proper procedure to upgrade ACS Primary/Secondary ACS deployment.Do I have to upgrade the secondary first or can I upgrade the Primary and then de-register Secondary to upgrade.thank you
Im trying to test the followingSETUP; -Two 5ks- Two 2Ks- one 2K has a dual home connection to each 5K- the other 2K has a single home connection to the 5KI have 3 connections from the 1K going to each 2KPrimary VSM is on ESX1Standby VSM is on ESX2the...
hoping someone can help me with the following issue.SETUP:NEXUS 5K --> NEXUS 2K --> NEXUS 1KI have configured a Data Vlan on my 5K as follow:SW1 interface Vlan582 no shutdown ip address 10.10.58.2/24 hsrp 1 ip 10.10.58.1 vrf context StaticVrf ...
Nice!It workedI now see the other control 0 come upn1000v(200516105213107 Eth100/1/15 150 S I s Nexus1000V control0 n1000v(200516105213107 Eth100/1/16 148 S I s Nexus1000V Eth4/3 n1000v(200516105213107 Eth1...
Thanks for your response RobertYes I have "mac-pinning" configured ( see below )port-profile type ethernet system-uplink vmware port-group switchport mode trunk switchport trunk allowed vlan 1-3967,4048-4093 channel-group auto mode on mac-pinning...