I have Catalyst 4506 Switch with 4013 SUP II Engineand 7.6(6) version Catos. Problem: I inserted WS-X4306 Module.In the show module command, its showing " empty ".The module is shwowing neither amber color nor green color.The module is not at all c...

HI, We have a new 2610XM router, in which we inserted a NM 4 A/S card which was working in other 2610 router. Upon booting the new 2610XM router with this card, its giving the following error.%PA-3-NOTSUPPORTED (x1): PA in slot 1 is not supported on...

Hi I am getting the error message on my PIX firewall.%PIX-4-402101: decaps: rec'd IPSEC packet has invalid spi for destaddr=ip-addr, prot=protocol, spi=spiCan anybody help me how to resolve the isuue.

Dear Team, We are unable to upload IOS into 3660 Router. When we boot the router, the following error is displayed and router is going to rommon mode. device does not contain a valid magic number boot: cannot open "flash:" boot: cannot determine fir...

Hi We have recently purchased 4506 switch and a L3 module. We have configured the switch SC0 interface with an ip address subnet mask set interface sc0 1 10.18.10.100/255.255.255.0 10.18.10.255 set ip route 0.0.0.0/0.0.0.0 10.18.10.200 in th...