NM 4 A/S Card detection problem on 2610XM

[supportgtb]

HI,

We have a new 2610XM router, in which we inserted a NM 4 A/S card which was working in other 2610 router.

Upon booting the new 2610XM router with this card, its giving the following error.

%PA-3-NOTSUPPORTED (x1): PA in slot 1 is not supported on this chassis

[smif101]

What version of IOS do you have running on the new router. You should at least have

12.1(14), 12.2(8)T1, 12.2(11)T, 12.2(11)YT, 12.2(12), 12.2(15)ZJ, 12.3(1), 12.3(2)T

Hope this helps

[supportgtb]

The router is running IOS Version 12.3(10)

[thisisshanky]

This module should be supported on almost every version of Cisco IOS starting with 11.3T. Dont know if this is a chassis problem. Try adding another network module on the XM router (if you have one) and see if that is detected.