About steve_mils

steve_mils · 10-18-2011

Hi all,I'm in the process of setting up compliance monitoring in CUPS (version 8.5.2) and have built a Linux server running PostgreSQL version 8.4.Getting the compliance feature working in Presence is a two step process, the first of which I've compl...

steve_mils · 06-08-2010

Hi all,I'm just going through some failover testing with a pair of ACE 4710 appliances configured as a fault tolerant pair and have noticed that it takes a while for my probes to start working correctly. To explain better:Reload the primary appliance...

steve_mils · 12-22-2009

Hi all,What's a simple way to implement a L2 network across 2 L3 DCs connected by 2x1Gig links using a 6504-E with SUP720-3C?! The DCs are only a few kilometres apart and our local service provider can only provide 1Gig fiber links between DCs (which...

steve_mils · 04-28-2008

Hi all,I have a 3800 headend router which has a number of ipsec tunnels to remote office sites. Our current QoS design applies a policy-map to each tunnel interface to prioritise and shape outbound traffic.My question is how does the physical egress ...

steve_mils · 03-25-2008

Hello,I have a problem with IP Source Guard on a Catalyst 3750 switch running 12.2.40SE IOS.I've configured port-security, DHCP Snooping and DAI and they all work as expected.However when it comes to IP Source Guard, things don't work as I expected.....

steve_mils · 11-15-2012

It works for me however the Media Services Interface software required to run video doesn't install on Windows 8.

steve_mils · 07-20-2012

We've suffered with this problem for a number of years, across 2800s & 2900s; both CUCM versions 6 & 7; a range of IOS versions including 12.4T, 15.1 and 15.2.Our latest incarnation is a 2951 running 15.2(3)T and CUCM 7.1.5.It's sad to think that it'...

steve_mils · 10-18-2011

For your info - a reboot of the server fixed this problem!

steve_mils · 06-09-2010

Ah ha!You're right - this is the case. I only have FT set up on the other contexts. I just assumed that you wouldn't want to sync the Admin context just in case interface configuration gets overwritten or something. I guess I should RTFM ;-)Thanks fo...

steve_mils · 06-09-2010

Hi Sean,Thanks for that - it worked. The probes still fail for a bit but the VIP only drops 2 pings instead of around 12. I've tried setting the carrier-delay to various numbers and have settled on 50 seconds as acceptable.BTW - I think you need to c...

Member Since	‎05-28-2004 02:29 AM
Date Last Visited	‎09-21-2018 01:24 AM
Posts	25
Total Helpful Votes Received	10

User Statistics

User Activity

Creating a CUPS compliance server

ACE4710 probe failure after reload

Simplest Data Center Interconnect?

policy-map on tunnel or physical interface?

IP Source Guard dropping DHCP Offers

Re: Does Cisco Jabber 9.1 work on Windows 8? If not when?

12.4.24T loses T.38 MGCP configuration

Creating a CUPS compliance server

Re: ACE4710 probe failure after reload

Re: ACE4710 probe failure after reload