Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to set DHCPRelay so DHCP requests from the inside interface of the ASA are routed to a DHCP server in another site. Get an error message when issuing the configuration command "dhcprelay enable inside" that states the inside interface is alrea...
I'm setting up an SNMP poller to retrieve the ARP table (ipNetToMediaPhysAddress) from my SF300 switches. I can retrieve the table from SF300-24P and SF300-48P switches running Firmware Version 1.0.0.27, but get garbage for the MAC address when retr...
There have to be a lot of customers running back-level Java just for ASDM and we are one of them. It runs under Java 7.25, but our organization is upgrading to 8.51 so we have to keep the old Java and avoid the upgrade.Java is a pain, but so is somet...
Did you get this resolved? I have the same problem, and the error message from the CLI says;DHCP: Interface 'inside' is currently configured as CLIENT and cannot be changed to a RELAY SERVER by a RELAY feature I had several firewalls behaving this wa...
We had this problem and have been working with TAC for days without success. Following the whitepaper, I was able to resolve this issue. We have replaced WS-X4548-GB-RJ45V and WS-X45-SUP8-E modules and the issue turned out to be a software incompati...
That solved my problem. I have a RADIUS (MS IAS) defined, but the RADIUS is using LDAP as the database for authentication. We manage the users by Windows Groups, and in the RADIUS policy conditions check for a certain Windows group in the user profi...
My problem: I have a local management user profile defined on my WLC and it works fine when the Priority Order is set to LOCAL. When I change the Priority Order to make RADIUS first and LOCAL second, I can't get logged into the WLC using CLI, GUI, o...
