Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have noticed some ( to my knowledge strange behaviour ) when I have configured the management port (GigE 0/0). Curious if it is my device or that is default behaviour cannot really find anything about it in the documentation. Via HTTP(S) it ...
Hi Dhiresh,Thanks for your answer, besides the point that you should not route it do a different subnet. I do not really get why traffic from outside the subnet should be slower since there is a router between them seeing it in perspective why would ...
Hi Andrew,It could be that the 890w AP is different, I have tested it with 1140, 1600 and 2600 series and that command is definitly available in those AP's. You made sure that you first did the following ?enabledebug capwap console clibefore executin...
Hi Andrew, Actually the W8 is the lightweight firmware not the autonomous image.You need to change the firmware. This can be done by acquiring the correct firmware from the cisco website if your entitled to it or from your Cisco supplier. Then instal...
