Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have this config in my nexus 1000v:port-profile type vethernet Server-network vmware port-group switchport mode access switchport access vlan 2 no shutdown system vlan 2 state enabledport-profile type ethernet Server-uplinks vmware port-grou...
Hi,We have a stacked environment with 3 cisco 3750G switches.We see that the network troughput is not getting its full potential, the highest load we see on a (1 gb) nic is 25%...Also the line is not steady at 25% but its going down and up every seco...
ok i've send you an email about this... i can say that my first question is resolved so im marking this question as answered and we will continue in the background
the Links on the catalyst switches have only VLAN1 configured and are in access mode, so that should be ok.when i added sub-group-id 0 to the NICs connected to the iscsi switch, Ping to the VM with a NIC connected to the iscsi-network does work.but a...
I now have this up and running , after reboot of the ESX server it seems to be working..But now i have another issue, i also have a iscsi network which have NICs connected to different switchesthese catalyst switches do not support etherchannels so i...
I can indeed see that 2 of the 3 ports are in operating mode: down (on the catalyst switches)Also when i look at the etherchannel trough cisco NA, that the only port that is up, is in standalone mode.The commands you mention are only for non-trunking...
Hi thanks for you reply,I would like to read something about others having the issue "since I also recall(?) another issue when ingress is gig and egress is 100. " as you described..it indeed seams that we only have 100 mbit on the receiving end, but...
