About senik_yurij

senik_yurij · 07-23-2009

My Linksys SPA400 has been accidentially powered off while firmware update. After restoring power supply device does not get ip from DHCP server. "Power" LED is on. "Status" LED is off. All four "Line" LEDs blink once in four seconds simultaneously. ...

senik_yurij · 07-30-2009

Thanks to Patrick and Alberto! I confirm the resolution of the problem. Mine SPA400 is also revived.

senik_yurij · 07-24-2009

Hi Patrick! Thanks for your responce.But I still can't do the job. In the instruction at point 2 it is writtten that I have to have firmware recovery image. So that is the problem. What is this?I tried to use several firmware bin files (different ver...

senik_yurij · 07-24-2009

Hello Glenn! If I press and hold reset button then "line" LEDs stop blinking and light constantly. But I still can't reach the device as it does not get any IP from DHCP.

Member Since	‎07-23-2009 12:26 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	4

User Statistics

User Activity

failed SPA400 firmware update

Re: failed SPA400 firmware update

Re: failed SPA400 firmware update

Re: failed SPA400 firmware update