Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone,I just fixed a problem that has been quite the issue for weeks; I think I understand why, but if someone could explain it a bit more for me if I'm wrong, I would greatly appreciate it.Basically, we have a S2S Tunnel to Azure from an AS...
Hey Everyone,Def need some advice on this...it just won't work!Setup is basically: LAN Switch has a direct SDWAN connection from Port 1 on the Velo with DHCP Relay enabled on the Internal Subnet Address of say 172.16.1.150 to the S2S DHCP Server on 1...
Hello,We have to drop a new ASA behind an SDWAN box and I wanted to confirm a route that's giving me a hard time. There are 2 ISP connections to the SDWAN Device which is itself connected to the ASA Outside interface (let's say 6.6.6.6) with the Insi...
Hello,I have a new setup for a client, any insight would be greatly appreciated.Setup will be: ISP1, ISP2 (SD-WAN), New CB Series Router, New FPR-1000.I'm basically looking for the best way to set this up with both ISP Links UP and PBR to send ONLY V...
I agree and have said this from the very beginning so thank you very much! I believe I was def given the incorrect information regarding this; there is nothing that I have come up with that makes any real sense to do it any other way...Thanks Again r...
Thanks rais!So, I think I'm overthinking this as I'm used to both ISP's being connected to the ASA (new to SDWAN obviously).I don't have access to the SDWAN device (but I can verify the default "out" with them). So, as far as the ASA is concerned:If ...
