About paolo96

paolo96 · 01-31-2024

Hello,I have some problems on two Cisco Catalyst WS-C3650 (not configured by me so i'm trying to understand what was done and how to fix this problems). Basically i have this two switches directly connected with a layer2 in a trunk port, and every sw...

paolo96 · 02-12-2024

Hi,this port is not used, I have highligthed the port currently in use. I know I wrote a lot, so I will try to make a recap. I have 2 routers and 2 switches with 3 vlans (2,3 and 7) all directly connected with trunk ports. So the topology is like Rou...

paolo96 · 02-12-2024

Hi,vlan 3 is still not working, both switches are still declaring themself as root for this vlan. We added vlan4 as a test on our routers and on both switches and we have the same issue. I posted the router configuration up.Here the show spann bridge...

paolo96 · 02-12-2024

Oh, my bad!Both routers are Huawei with layer3 sub-interfaces, so no vlans. I can't put all the configurations. Here the lan interfaces configuration and some show commands.ROUTER A:interface GigabitEthernet0/0/2description **LAN_Management_bk_to_bk*...

paolo96 · 02-12-2024

Hello,as you asked. I ommitted some descriptions/configurations like radius or snmp for company policy. Also I noticed that, while I was out, my colleagues removed the stp priority command (spanning-tree vlan 2,3,7 priority 0 (4096)) to make some tes...

paolo96 · 02-12-2024

As you asked. Also, what do you mean with this command: "show spann brief"SWITCH Ashow vlan:VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Gi1/1/42 MPLS active Gi1/0/3, Gi1/0/4, G...

Member Since	‎01-31-2024 12:30 AM
Date Last Visited	‎03-06-2024 12:38 AM
Posts	7

User Statistics

User Activity

Spanning tree issue

Re: Spanning tree issue

Re: Spanning tree issue

Re: Spanning tree issue

Re: Spanning tree issue

Re: Spanning tree issue