About Rolitto

Rolitto · 11-08-2021

Hi, I have the following scenario: Internet/ISP-----Modem/Router R1-----Router R2-----PC/Server | | | Mobiles, NAS, P...

Rolitto · 08-10-2020

Hi everyone,Following up a SOHO network that I am designing, I have an ASA 5505 firewall behind a router, and I need some end devices like the NAS and FTP server to be configured with static IP addresses so that I can access them remotely via DDNS. H...

Rolitto · 08-02-2020

Hi everyone,I have this basic scenario:(LAN) --------- (ASA) ---------- (DSL Router) ---------- (Internet)I am able to ping the DSL Router from the LAN but not vice versa. Is it a common case with the ASA deployed in between or am I missing something...

Rolitto · 07-28-2020

Hi, I am configuring a DHCP pool on a Cisco ASA5505 to provide the internal network (VLAN 1) with IP addresses ranging from 192.168.1.50 to 192.168.1.200 on a subnet of 192.168.1.0/24. However, I am getting an error that I cannot get a range of more ...

Rolitto · 07-21-2020

Hi, I purchased a second-hand Cisco 867VAE (IP-Based version) router and was exploring its configuration when I noticed that after assigning "Ethernet 0" with an IP address, I couldn't ping my desktop (same subnet of course). However, I could pink my...

Rolitto · 11-09-2021

Yes, the PC/Server has the McAfee anti-virus installed on it, but when I completely disabled it (turned off firewall) and tested it, it didn't change much the outcome.Besides that, the NAS was previously on the same network as the PC/Server and assig...

Rolitto · 11-09-2021

Exactly.I previously exchanged R2 (the DD-WRT router) with a very basic router with the least security options checked so that I wouldn't doubt about that. I had the same issues.

Rolitto · 11-09-2021

Paul, yes the mobiles, laptops, NAS, printer, and the WAN interface of R2 are all attached to the LAN interfaces of R1, hence assigned to the same network: 192.168.2.0/25.I'm not sure what you exactly mean by routing looks okay between R1 and R2 sinc...

Rolitto · 11-09-2021

Georg, sorry for missing replying on you. Here's the output of the DD-WRT: And here's the output of ipconfig /all:

Rolitto · 11-09-2021

The printer, laptops, NAS, and mobiles are all on network 192.168.2.0/25. The PC/Server is on network 192.168.1.0/28.As for the 2nd question, I tried assigning a default static route on R2 having the WAN interface (IP address 192.168.2.2) as the gate...

Member Since	‎11-30-2011 10:10 AM
Date Last Visited	‎06-04-2022 06:47 AM
Posts	39
Total Helpful Votes Received	10

User Statistics

User Activity

Resolving Double NAT Issues

Static IP addresses behind the ASA Firewall

Pinging through ASA from Outside

Not enough IP addresses per VLAN on ASA5505

Cisco 867VAE (IP-Based version)

Re: Resolving Double NAT Issues

Re: Resolving Double NAT Issues

Re: Resolving Double NAT Issues

Re: Resolving Double NAT Issues

Re: Resolving Double NAT Issues