Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to enable a single SSID to support EAP and non-EAP clients. This is to enable non-EAP clients to be directed to a captive login portal, and EAP clients to go directly to the network.I am able to make EAP optional for authentication, but ...
I just purchased an AT&T Tilt and hope to be able to use it in a wider audience at our company, however I am having a problem that may force me to return it and look for a different platform.I can connect the Tilt to my home WiFi network (Open/WEP) w...
I am trying to get my ATA 186 (running version SCCP 3.x under CCM 5.04a) to reproduce received rtp-events. This is supporting a third-party IVR system that is connected via analog ports.The IOS gateway that is sending the events is configured for dt...
I am setting up a LAN-to-LAN VPN between a VPN3030 and a PIX 501. I am able to pass traffic through the VPN from PCs or Servers on either side.I would like to be able to telnet/ssh to the PIX over the VPN so that I am able to manage it remotely. I am...
I have a PIX 515e with 6 interfaces (5 in use) - inside, outside, dmz, dmz2 and vpn.I am unable to telnet (or anything else) from dmz2 to dmz or dmz to vpn (possibly other combinations), but I am able to get from inside to anywhere or outside to anyw...
So this is close to what I want, but not quite. You have Open with Static WEP or EAP with dynamic WEP as the two options.This works for me, too.I need Open with *NO* WEP or EAP with dynamic WEP.
I want to use dynamic WEP keys (generated by the EAP exchange), so no static WEP keys were configured.Of course, I *could* put the EAP clients on the .11a radio, but that effectively puts them on a different SSID (logically the same, but physically d...
It turns out that this problem was specific to Cisco's WLAN implementation. Cisco has a set of wireless extensions called CCX that are implemented on wireless devices (clients) to aid the infrastructure in managing the radio environment, location man...
I was suspecting that these overlaps may be problems, but nothing that I could find indicated it was for sure. They are. I put the more specific statics in the config and it fired right up.Thanks for the help.
