Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
One servers ip is 172.16.5.x this is connected through one path (path1) and secondary ip is 10.10.2.x through another path(path2)Want to communicate to secondary ip as primary ip through path2.1. LAN - Router1- Router - LAN-Server (172.16.5.x)2. LAN ...
HiCurrent i have Pix 515E and IDS 4215We want to buy another setShould we go throgh with the same or ASARequirements:1. Stateful Firewall 2. Content and URL filtering3. VPN Clients Supports4, IDS5. Web based managementsPls provide your valuable sugge...
HiWe have 4 floor around 600 users.Want to configure VLAN for each floor.Have the following equipments:1. Core switch - Catalyst 40062. Catalyst - 2950 in each switch3. MS DHCP server is connected to Core switchAnyone help me how to configre VLAN wit...
HiI have a backup pix of 515E. Same configuration of existing one. When disconnect the live one and connect the backup one then able to go outside except the m/cs which are mapped with public ip.help plsThanksRezakarimmr@ebl-bd.com
Hi Swithcing server can identify the ATM server through the ATM ID. BUT only one ip can be put for one ATM ID. So the switching server can identify the ATM by only one IP. Pls see the attachmentNow want to know the configuraton of Router2 as per atta...
Hi HTHIssue is slightly different. Server beyond the LAN can communicate with the both primary and secondary ip address of remote m/c through only by one ip address.This is the limitations of the application runnning of the host server.So server will...
Hi AmitThanks for your response.We have one Layer 3 switch of another company named ALLIED TELESYN Model: 9724TS which is directly connected to Servers and Catalyst 4006.Is it possible to implement VLAN among ATI switch and Cisco catalyst.If possible...
