Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 ASA 5540's in active passive failover connected to one of our ISPs. We have other firewalls that have another ISP as their gateway. We want to consolidate and run both ISPs on the ASA 5540s. What I want to do is use the IP address' from the...
I want to start by thanking everyone for taking the time to ready this. We currently have a Fortigate firewall in place. We have multiple VLANS seperating our voip phone system from the rest of our traffic, and we also seperate out our guest wireless...
Currently we have a network that is not physically seperated but seperated using VLANS. Servers and workstations are in a VLAN, IP Phones are in a VLAN. We host a web application for our customers and we would like to seperate the servers that host t...
I have a Cisco Aironet 1252g setup and I have 2 PCs using linksys N adapters connecting to it. Speed is comparable to G. Is there something special I should be doing to improve the speed. I setup the AP within line of site and only about 50 feet away...
I have a 806 running c806-o3sy6-mz.122-4.YH.bin. I need to know what version of IOS image do I need to be able to default router to DHCP (IP ROUTE 0.0.0.0 0.0.0.0 DHCP). I cannot do this with what I have. THanks in advance.
I should have been more detailed on my problem. It isnt just ICMP that is not getting from the inside to the rest of the world. Its everything. I know my default route is right because Im able to ping the outside interface from a machine out on the w...
There was someone in the help desk that setup a small unmanaged linksys switch for someone that didnt have enough network connections and when someone was moving the loop was caused at that location. I dont want to use those devices but people just k...
Currently at the perimeter there are two firewalls in HA fail over setup. those go into the core switches which all servers, and distribution switches are plugged into. A recent outage was caused by a network loop. We are using spanning tree and loop...
