Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have two sites one is configured with:router eigrp 2 redistribute static network 99.0.0.0 no auto-summary no eigrp log-neighbor-changesThe other end is not configured with EIGRP. The below ip address is of the swtich without eigrp configured. Co...
Hi I am redesigning a network for the please can someone clarify the following questions;At the DC I have a:2 x Distribution switches 4506-10G2 x Core switches 6500 10G2 x DMZ switches 4503The Dis switch is where I connect the external connection to ...
Hi I wish to config vtp pruning but only on some trunks. i have 70 vlans and only want vlans 1,42 and 666 active. Please can some confirm this is the correct method:Core switch:switchport trunk pruning vlan add 1,42,666Does this by default stop all o...
Hitrying to upgrade from rommon but not even able to ping from laptop to 4506-ePlease can some assistUnsupported chassis type 51, system can not bootRom Monitor Program Version 12.2(31r)SGA1 Supervisor: WS-X4516-10GE Chassis: WS-C4506-E Hardware Rev...
Hiattached is a current Cost flow for vlan 1 which works correctly all vlan1 traffic goes via the primary link and the blocking is done via the secondary link.The proposed diagram we remove CS_2 from the network and connect the two cables into a laye...
Hi Sorry for the lack of info. Please see below:Pleae see ddiagram attached.CS_1 and Cs_2 has the following configuredrouter eigrp 2 redistribute static network 99.0.0.0 no auto-summary no eigrp log-neighbor-changes The Datacenter doesnt have and con...
Hiwe have a L2 network. So my understanding is to have all the external client links connected to the DIS and create all the virtual vlans on the core. The DMZ is where we plu in the firewall interfaces segrated vlans but not the external web
This could cause me a slight problem as we make vlan changes on a daily basis and need to do this during working hours. Would pruning provide me with the function on applying changes during the day. I would like to have some kind of control and not l...
