Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I've a commit fail when I try to commit my switch-profile on my Nexus 5k in a VPC domain.
The verify commande is successful.
I tried to delete the buffer with buffer-delete all on both switches but the command is still failed.
The failed comman...
I've two 4500X configured in VSS mode and I use it as my main gateway.I try to ping 192.168.125.247 (vlan 125) from a machine in vlan 120 (192.168.120.164 / 255.255.254.0 / 192.168.120.254 ) and the ping is not working.The 4500X cluster is the gatewa...
Hello,I've a strange behavior with 2 new 4500X.Please see my basic network topologyWhen 192.168.80.253 is shutdown 192.168.80.252 can ping 192.168.80.251 :switchA#ping 192.168.80.251 source 192.168.80.252Type escape sequence to abort.Sending 5, 100-b...
Hi,I want vlan 124 use the second path (G2/1/4-G2/1/1), the other vlan use the first path (G1/1/4-G1/1/1)Here is my conf for both switches :SW1 :spanning-tree mode rapid-pvstspanning-tree extend system-idspanning-tree vlan 8,62,120,125-126,128-129,17...
Hi,I'm testing QoS with a 3750-XI want to mark traffic in the 192.168.126.0/24 subnet with DSCP EF.I've entered this command :mls qosclass-map match-any class_126 match access-group 2policy-map mark_dscp_126 class class_126 set dscp efaccess-list ...
I have corrected this issue by adding two links between my 4500X Cluster and my two Nexus. Now, each 4500X is connected to each Nexus (So, I've four links in the etherchannel instead of two).I remove also the following command mac address-table aging...
That's interresting Rudi !I also see this open Caveats for Cisco IOS XE Release :Packets that are routed on the same Layer 3 interface (or SVI) that entered on are dropped if received on the VSS standby switch.Workaround: None. CSCub63571
My VSS cluster is connected to 2 Nexus 5548P (VPC) (Port-channel13)Now I've changed mac address-table aging to 14400 for vlan 125 and everything is ok, but for me, this is not normal.I'll check later when I've more time...Thynk you guys
