About Wafabewafa

Wafabewafa · 06-08-2015

Hi, Currently i am running mls qos on existing old switches which needed to be replace. New switch with 15.x doesn't support mls qos..My current qos setting on access switch aremls qos map cos-dscp 0 8 16 26 32 46 46 56mls qosand on interfaceinterfac...

Wafabewafa · 05-19-2015

I have two core switches in each office connecting both office one through point-to-point.Now i have second point-to-point which i wan to use as backup.see attach diagram, main point-to-point is configure in Vlan not as routed port.. What is best way...

Wafabewafa · 06-16-2015

It is enable see below result Ingress DSCP0 0 0Ingress DSCP1- til-63Ingress COS0 0 0Ingress COS1-7Egress DSCP0Egress DSCP1-63 My question is does this mean i dont have to configure auto voip class/policy? If i want to configu...

Wafabewafa · 06-08-2015

Mark, New switches are c3650-ps-s support only auto qos.I have avaya voip phone and pc on same interface.. Regards,wafa

Wafabewafa · 05-19-2015

Here is config for 100MB link.. second link would be standby10MB..Switch 1interface GigabitEthernet2/5/3 description 100MB point-to-point switchport switchport access vlan 55 switchport mode accessinterface Vlan55 description New Point To Point ip ad...

Member Since	‎05-19-2015 02:38 AM
Date Last Visited	‎02-26-2021 07:45 PM
Posts	6

User Statistics

User Activity

mls qos vs auto qos (issue)

Configure backup point to point link on VSS switches

It is enable see below result

Mark, New switches are c3650

Here is config for 100MB link