I have an NCS5700 device with a sub-interface configured as follows:RP/0/RP0/CPU0#show interfaces HundredGigE 0/0/0/5.2110
Sat Sep 7 05:39:09.420 UTC
HundredGigE0/0/0/5.2110 is up, line protocol is up
Interface state transitions: 1
Hardware is ...
Could Destination Port Be VLAN in Port Mirroring on NCS5500? I saw failure messages as follows.Monitor-session xxxxDestination interface HundredGigE0/0/0/15.200Session has not been set up in the hardware===============================================...
Thank you @Giuseppe.P93 It works if the destination port is physical interface. However, in my situation, using the VLAN tag is intentional.BB mentions the version of 7.8.x while my version is 7.7.2. Is the VLAN destination port a new feature introdu...
Thanks.The version is "Cisco IOS XR Software, Version 7.7.2".I am currently using VLAN tag 200 for both sub-interfaces for testing purposes. It would be more effective to use different VLAN tags for each sub-interface.Here is the details of monitor-s...
