Hello,
What is the easiest/cheapest way to set up a lab for CUCM to simulate incoming and outgoing call?
I have a Cisco VG202 I was wondering if this can be used to be the gateway I also found that 2811 routers are popular to do such lab? Is it po...
Hello,
What's the best approach of upgrading an existing CUCM 9.x to 12.x?
We have purchased a new BE 600M Server (M5) to run the new 12.x. My concern is, can I just backup the existing 9.x box using DRS and restore the flat-file on the new 12.x ...
Hello,
I'm trying to forward a huge number of ports (8500-8600). I tried using the ASDM but I'm getting an error please see attached file. How do I achieve forwarding the above ports?
Thanks in advance!
-Ed
Hello,
I'm trying to forward a huge number of ports (8500-8600). I tried using the ASDM but I'm getting an error please see attached file. How do I achieve forwarding the above ports?
Thanks in advance!
-Ed
I have installed Cisco AnyConnect VPN Client 4.0, login successfully but after the successful connection of VPN I get no internet connectivity, cant browse anything.. Your help will be really appreciated. Thanks
In my situation, I believe that CUCM 12.x and all its components are already installed on the new hardware (BE 600M). Can the PCD perform the migration between the old hardware to the new hardware?
Hi john.laham,To answer your questions, I'm able to ping between Vlan 20 and 30, therefore the inter-VLAN routing is working. The reason why I'm assigning the ip address on the vlan 1 of the ASA because the ASA model that I have does not allow you to...
Hi, Thank you for responding. Below is the config that I have, I still couldn't ping the 192.168.20.x or 192.168.30.x from the firewall inside interface. L3 Switchvlan 10name Link to ASAinterface Vlan10description Link to ASAip add 10.10.10.2 255.255...
