About dannroovaa

dannroovaa · 03-28-2016

Hi Experts,Please advice on this issue,We have a VPN Site to Site Tunnel configured, but our Public IP Address is dynamic, so when our IP changes the tunnel falls, so I know that there's a way to solve this issue but I don't know how, I think is some...

dannroovaa · 12-04-2015

Hello all, I am facing some restrictions using QuickVPN, the restriction which cause me more problems is the Subnet conflict of remote VPN Server (See Known errors Image for reference),the environment is as following:Device IP Address: 192.168.1.254S...

dannroovaa · 06-16-2015

Hello Cisco Suppor Team,I have been trying to configure Port Forwarding in RV042G but I have not success, I need to access from outside of my LAN to one server (Windows Remote Desktop), previously I have a Linksys E2500 were I configured as Image: ''...

dannroovaa · 06-09-2015

Hello Experts,I would like to know if there's any way to modify the Subnet Mask dropdown so I change the subnet mask to 255.255.252.0 in the LAN Configuration,So I can get this network: 192.168.0.1 /22192.168.0.1192.168.1.1192.168.2.1192.168.3.1Thank...

dannroovaa · 05-25-2015

Hello Experts,I have recently bought Cisco Small Business RV042G, but I have trouble configuring subnets, I would like to know how do I assign subnets per ports ?I would like to create for example: Port 1 - 192.168.1.x /24, Port 2 - 192.168.2.x /24 a...

dannroovaa · 06-18-2015

Hello Mike,Many thanks for your feedback, now I can Forward all my services!Also I have set 192.168.1.0 as default DMZ host,Kindly Regards!,Adrian

dannroovaa · 06-02-2015

Hi Michael,Many thanks for your great support! , Now I can route outside to the cloud, the default gateway was established correctly, think was a misconfiguration of my pc (unrelated to Default gateway),Best Regards,Adrian

dannroovaa · 05-29-2015

Hello Michael,Sorry to trouble you again, let me share you my escenario (last question),1.- My wan connection has the ip address: 192.168.1.200 (Please see ''Wan status'' image for reference)2.- I have created my LAN connection with the IP address: 1...

dannroovaa · 05-28-2015

Hello Mike,Many thanks for your feedback, I have been trying to find where to assign a port on vlan ''X'' to a created subnet,also I have taken a look but I have had not success,Regarding previous attached image ''rvo.png'', I would like to assign su...

Member Since	‎05-25-2015 11:02 AM
Date Last Visited	‎02-26-2021 07:47 PM
Posts	10

User Statistics

User Activity

VPN Configuration with Local Dynamic IP Address - RV042G Gigabit Dual WAN VPN Router

RV042G VPN Restrictions - QuickVPN

RV042G - Port Forwarding

Router RV042G - Lan Setting/Subnet Mask

CISCO RV042G - Configuring subnets

Hello Mike,Many thanks for

Hi Michael,Many thanks for

Hello Michael,Sorry to

Hello Mike,Many thanks for