Hello all,
I am facing some restrictions using QuickVPN, the restriction which cause me more problems is the Subnet conflict of remote VPN Server (See Known errors Image for reference),
the environment is as following:
Device IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
I have created some Subnets for VPN Connection purpose. (See LAN Setting Image for reference)
Type of VPN: Client to gateway (See Local Group Setup for reference)
Note:This VPN was erased and after this, QuickVPN still connect to the VPN
My doubts are:
How can I assign to which subnet does QuickVPN log in, so I avoid the Restriction of ''Local IP address conflicts with the subnet remote VPN Server''?
Why after I have erased the Client to Gateway VPN configuration, QuickVPN still connects to VPN? In addition to this:
VPN Setting Status:
| Tunnel(s) Used : |
0 Tunnels |
| Tunnel(s) Available : |
50 Tunnels |
How does QuickVPN works? which configuration is taking ?
I have attached some Images of my router config. for reference,
Thanks for any feedbacks,
Adrián
