About siddiquiomer

siddiquiomer · 02-05-2012

i am stuck in a issue! unable to ping the SVI i am design a small network for a office. 1 router 2811 1 switch 3750-e ----------------- Router is connected to the mpls cloud with ospf. here re the config. Router# int fa0/0 ip 10.10.10.1 255.255.255.2...

Re: Hi Wayne.You should select · 10-02-2019

that perfect answer , thanks. following is the quick summery.log-in into CUCM > from the main screen use following flowCall Routing > Call Pickup Group > click on Find > a list will bee appear > click any listed group > go to top left > Related Lin...

siddiquiomer · 02-16-2012

Vivek - now i need to introduce a new segment , 100.100.100.0/24how should i configure it?

siddiquiomer · 02-10-2012

and all the routing and satic route will remain same as Router-1

siddiquiomer · 02-09-2012

i have received back-up link with the same routing protocol OSPF !CE Edge (20.20.20.17 255.255.255.252) - My router2PE Edge (20.20.20.18 255.255.255.252) - Service ProviderRouter2#int fa0/1ip address 20.20.20.17 255.255.255.252des connect to MPLS clo...

siddiquiomer · 02-06-2012

thank you Vivek and Cadet and give your value time! Vivek,that time there is no static route towards the switch so not working that time.i miss that one.and you can see my following post where i remove the re-distribution.but now finally when i add t...

Member Since	‎06-15-2010 01:10 AM
Date Last Visited	‎10-04-2019 03:08 PM
Posts	20

User Statistics

User Activity

unable to ping the SVI VLAN

Re: Hi Wayne.You should select

unable to ping the SVI VLAN

unable to ping the SVI VLAN

unable to ping the SVI VLAN

unable to ping the SVI VLAN