About kianaun

kianaun · 05-17-2006

Hi, I am trying to find which port of the switches it connected to thru mac-address?I am able to get the mac-address from the ip address when i do"show ip dhcp binding snooping" at the core switch.But when I move on to the Edge switch to check which ...

kianaun · 04-24-2006

Hi,Has everyone ever experience this error log before from the router?4w5d: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed connection id=3Thanks in advanced.ken

kianaun · 05-17-2006

PC traced! Ankur, you are the man..! You are indeed right..Today I will have a good sleep thanks!KL

kianaun · 05-17-2006

Hi Ankur,Thanks for your reply again. I have gone through all the Edge switches and search for that particular PC, but to no avail.There are only less than 10 edge switches,so i search only those switch with tat particular vlan,but could not find tha...

kianaun · 05-17-2006

I am also suspecting it could be a hub that connecting to the port of the switch which hold that specified vlan, and the PC(000d.60cb.445d) is connected to the hub.Thus not sure how to trace if this is the case.Any insight?thanks again.

kianaun · 05-17-2006

Thanks Ankur,nbhandarkar.But if the cdp is disabled, any other ways to do it?I have tried to search at all edge switches with the specified vlan but seems like still returning me the trunk port result..:(Need you guys assistance again..thanks!KL

kianaun · 04-25-2006

Hi Kumar,Thanks for your reply.I have checked on the router, it's transform set is :XXXX#: sh crypto ipsec transform-setTransform set setXXX1: { esp-3des esp-sha-hmac } will negotiate = { Transport, },And on the peer router, I also found this err...

Member Since	‎04-23-2006 05:49 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	11

User Statistics

User Activity

How to find which port on the switch that it connected with Mac address?

Crypto Error

Re: How to find which port on the switch that it connected with

Re: How to find which port on the switch that it connected with

Re: How to find which port on the switch that it connected with

Re: How to find which port on the switch that it connected with

Re: Crypto Error